当前位置:首页 >> 解密信息 >> 芯片解密

PIC18F26K22芯片解密

时间:2010-08-24 09:00:33

深圳世纪芯公司专业提供各种IC芯片和单片机的解密服务,涵盖典型的FPGA解密、MASK掩膜芯片解密、MSP430解密、PIC解密、AT88解密、ISPLSI芯片解密、gal芯片解密、WSI/PSD解密、TOSHIBA解密、MC9S08解密、ARM芯片解密、CPLD解密等。
世纪芯长期提供高效、高可靠性、低成本、短周期的解密服务。有PIC18F26K22芯片解密需求者欢迎与我们联系详细的解密合作详情。
电  话:0755-83035861
咨询QQ:992091822
Email:
coreic@126.com


High Performance RISC CPU:
•  C Compiler optimized architecture/instruction set
•  Data EEPROM to 1024 bytes
•  Linear program memory addressing to 64 Kbytes
•  Linear data memory addressing to 4 Kbytes
•  Up to 16 MIPS operation
•  16-bit wide instructions, 8-bit wide data path
•  Priority levels for interrupts
•  31-level, software accessible hardware stack
•  8 x 8 Single-Cycle Hardware Multiplier Extreme Low-Power Management with nanoWatt XLP™:
•  Sleep mode: 100 nA, typical
•  Watchdog Timer: 500 nA, typical
•  Timer1 Oscillator: 500 nA @ typical 32 kHz Flexible Oscillator Structure:
•  Precision 16 MHz internal oscillator block: - Factory calibrated to ± 1% - Software selectable frequencies range of 31 kHz to 16 MHz - 64 MHz performance available using PLL – no external components required
•  Four Crystal modes up to 64 MHz
•  Two external Clock modes up to 64 MHz
•  4X Phase Lock Loop (PLL)
•  Secondary oscillator using Timer1 @ 32 kHz
•  Fail-Safe Clock Monitor: - Allows for safe shutdown if peripheral clock stops
•  Two-Speed Oscillator Start-up Special Microcontroller Features:
•  Full 5.5V operation (PIC18F2XK22/4XK22)
•  Low voltage option available for 1.8V-3.6V operation (PIC18LF2XK22/4XK22)
•  Self-reprogrammable under software control
•  Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
•  Programmable Brown-out Reset (BOR)
•  Extended Watchdog Timer (WDT) with on-chip oscillator and software enable
•  Programmable code protection
•  In-Circuit Serial Programming™ (ICSP™) via two pins
•  In-Circuit Debug via two pins Analog Features:
•  Analog-to-Digital Converter (ADC) module: - 10-bit resolution - 17 analog input channels (PIC18F/LF2XK22) - 28 analog input channels (PIC18F/LF4XK22) - Auto acquisition capability - Conversion available during Sleep
•  Programmable High/Low Voltage Detection (PLVD) module
•  Charge Time Measurement Unit (CTMU) for mTouch™ support: - Up to 28 channels for button, sensor or slider input
•  Analog comparator module with: - Two rail-to-rail analog comparators - Comparator inputs and outputs externally accessible and configurable
•  Voltage reference module with: - Programmable On-chip Voltage Reference (CVREF) module (% of VDD) - Selectable on-chip fixed voltage reference Peripheral Features:
•  24/35 I/O pins and 1 input-only pin: - High current sink/source 25 mA/25 mA - Individually programmable weak pull-ups - Individually programmable interrupt-on-pin change
•  Three external interrupt pins
•  Up to seven Timer modules: - Up to four 16-bit timers/counters with prescaler - Up to three 8-bit timers/counters - Dedicated, low-power Timer1 oscillator
•  Up to two Capture/Compare/PWM (CCP) modules
•  Up to three Enhanced Capture/Compare/PWM (ECCP) modules with: - One, two or four PWM outputs - Selectable polarity - Programmable dead time - Auto-shutdown and Auto-restart - PWM output steering control
•  Two Master Synchronous Serial Port (MSSP) modules with two modes of operation: - 3-wire SPI (supports all 4 SPI modes) - I2C™ Master and Slave modes (Slave mode with address masking)
•  Two Enhanced Universal Synchronous Asynchronous Receiver Transmitter modules (EUSART): - Supports RS-232, RS-485 and LIN 2.0 - Auto-Baud Detect - Auto Wake-up on Start bit
 

解密技术
解密问题
芯片解密